TEAK GRATING MATERIAL is 4' long. Measures 1" wide and 15/16" thick with 15/16" cutouts. Recommended for use in cockpit but is thick enough to be used almost anywhere. 1" Grating.

Volume pricing availalbe. Email us for a quote.

The notched grating material comes in three thickness/cutout sizes with corresponding flat grate strips. You can build your grate two ways: 1) Using notched strips in both directions, or 2) Using notched strips in one direction for the bottom layer and flat strips in the other direction for the top layer. The second method allows water to drain underneath grates that are installed on flat surfaces.

1 inch Flat Teak Grating materital, 4 feet

1 inch Teak Grate Material, 4 feet

1/2 inch Flat Teak Grating Material (use with 60862)

1/2 inch Teak Cockpit Grate Framing Material (use with 60862 & 60875)

1/2 inch Teak Grating Material

3/4 inch Flat Teak Grate material (use with 60863), 4 Feet

3/4 inch Teak Grate Framing Material

3/4 inch Teak Grate Material, 4 Feet

Teak Grate Material from AFI

Download our Teak Sizing Chart (pdf)

Note: This item is currently out of stock. We anticipate it will be available after 15 March 2010..

1 inch Flat Teak Grating materital, 4 feet

( Part # AFI 60877 )

E-Mail sales@shipstore.com with any questions.