TEAK LOUVER measures 4'.

To figure out how many louver slats are needed, subtract 4" from the overall width and 4" from the overall height of the door, and multiply the two numbers. This gives you the total number of inches of louver slat needed. Divide this number by 48 inches and round up to the nearest whole number for the number of slats. We recommend adding 1 or 2 extra slats depending upon the size of the job - better to have 1 extra piece than to be 1 short in the middle of the project.

For the length of the slats, subtract 4" from the overall width and add 3/8" to come up with the length of the slat.

Slat measures 1-3/16 x 3/16 x 48.

Use with parts below.

Note: This item is currently out of stock. We anticipate it will be available after 15 April 2010.

Teak Louvered Door Side Rails (left and right)	( Part # AFI 60880 )
Teak Louvered Door, Top and Bottom Stiles, 4 feet	( Part # AFI 60881 )
Teak Door Louver Slats ONLY 4'	( Part # AFI 60882 )

E-Mail sales@shipstore.com with any questions.