GENERAL AUTOMOTIVE-SIERRA | GAS FILLED HATCH LIFT SUPPORT 20" x 30 (d/c) | GS62780 from the ShipStore.com ™ on-line catalog.

General Boating Hatches & Accessories

GAS FILLED HATCH LIFT SUPPORT 20" x 30 (d/c)

Nautalift Gas Lift supports are marine grade, exact OE replacements.

Features hard chrome plated chafts, engineered polymer rod ends, bronze bushings and a unique multi-lobe intgernal seal. Nitrogen filled.

ALWAYS replace gas springs in pairs.

Uses ball joint type brackets. See below if needed.

Extended: 15
Compressed: 9.5
Rated (lbs): 30

Note: This item has been discontinued. We have none in stock and it is no longer available to us.

GAS FILLED HATCH LIFT SUPPORT 7.5X40 (d/c) ( Part # GEN GS62610 )
GAS FILLED HATCH LIFT SUPPORT 10"X40 (d/c) ( Part # GEN GS62640 )
GAS FILLED HATCH LIFT SUPPORT 15" (d/c) ( Part # GEN GS62700 )
GAS FILLED HATCH LIFT SUPPORT 15" x 60 (d/c) ( Part # GEN GS62710 )
GAS FILLED HATCH LIFT SUPPORT 17" x 20 (d/c) ( Part # GEN GS62720 )
GAS FILLED HATCH LIFT SUPPORT 17" x 90 (d/c) ( Part # GEN GS62760 )
GAS FILLED HATCH LIFT SUPPORT 20" x 20 (d/c) ( Part # GEN GS62770 )
GAS FILLED HATCH LIFT SUPPORT 20" x 30 (d/c) ( Part # GEN GS62780 )
GAS FILLED HATCH LIFT SUPPORT 20"X60 (d/c) ( Part # GEN GS62800 )
GAS FILLED HATCH LIFT SUPPORT 20"X90 (d/c) ( Part # GEN GS62820 )
GAS SUPPORT FLAT BRACKET (d/c) ( Part # GEN GS62850 )
90 degree Angle Bracket, 2 Hole, for Gas Support (d/c) ( Part # GEN GS62870 )
90 degree Angle Bracket, 3 hole for Gas Supports (d/c) ( Part # GEN GS62900 )
GAS SUPPORT BALL STUD Bracket, 10 mm (d/c) ( Part # GEN GS62920 )
HATCH LIFT SPRING Stainless Steel 7/16 x 8-3/4 inches ( Part # ATT 124613 )

E-Mail sales@shipstore.com with any questions.