Power House Ice Eaters are designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.

Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Rough coverage is
- 1/2 hp: 50 diameter circle
- 3/4 hp: 60 foot diameter
- 1 hp: 70 foot diameter
If the units are installed at an angle, the resulting oval will be roughly 10 feet narrower on the sides and 10 feet longer on the ends.

Power House ICE EATER DE-ICER 1/2 HP 115V

Power House ICE EATER DE-ICER 3/4 HP 115V

Power House ICE EATER DE-ICER 1 HP 115V

Power House SPARE PROPELLERS

Power House Thermostat, Fixed Set Point

Power House ZINC FOR 1/2,3/4HP Ice Eater (X 0)

Use our Seloc Engine Manual Locator
to find the correct manual for your engine.

Note: You may need to turn off Pop-Up Blockers
on your browser for this function to work.
It will open a small window for you
to enter your engine information.
Mac Users: This doesn't always work in Safari
- try IE or Firefox instead if you have trouble.

ICE EATER De-Icing Equipment	( Part # POH ICEEATER )
Salt or Freshwater adjustable Temperature Thermostat	( Part # POH KP16110 )
De-Icing Equipment from Pyramid Technologies	( Part # PTI D-ICER )

E-Mail sales@shipstore.com with any questions.