NOTE: This glue must be shipped via UPS Ground services only, within continental US. It is shipped only as a single unit. Each can MUST be separately packed. It cannot go via Air or 3 Day Select.
This kit contains 1/4 Liter (8oz) glue, hardener and toluene thinner for application of the Weaver Snap Davits onto a hypalon inflatable boat.

Please check the material your inflatable is made from in your inflatable brochure for proper use of this kit.
Note that Weaver 3001kit glue is considered univeral and may be ordered if you are not sure about the fabric.

In Zodiac boats If the air seams have about 2" bandage strip covering the joint, then it is the newer pvc based Strongan fabric, and the PVC glue kit is essential. If the edges are just folded over it is hypalon based.

This kit is a one-shot can. Hardener must be mixed with glue, then used with an hour. It cannot be saved for other jobs.

If in doubt, drop us an email from the link below.

Some known hypalon boats include: Avon, Achilles, Norlantic, Dynus, Seaworthy, Nouvurania, BAT, Boat/US, Flatacraft, Dunlop, Nissan, Sea Rover, Semperit, Polimax, West Marine( red or grey), Metzeler (before 1989).
Contains: Glue, activator, solvent, paper cups, brushes, sandpaper, instructions.

See our Repair Primer for details on gluing: http://www.shipstore.com/ss/HTML/INFO/INFOHYPNEO.html

If you need fabric for patches, visit http://www.shipstore.com/ss/html/zod/zodfabric.html. Give size in inches, color, manufacturer and model o f boat.

NOTE: This must be shipped via Ground services only. It cannot go via Air, or 3 Day Select.

Note: This item can only be shipped by Ground Services. Please plan delivery times accordingly.
Note: This item cannot be shipped outside the U.S.

Other options:

Weaver Snap Davits for Inflatable Boats, Swim Platform Mount, Black	( Part # WVR RBD100BK )
Weaver Snap Davits for Inflatable Boats: Grey	( Part # WVR RBD100GY )
Hypalon Glue Kit (use WVR2001KIT) (d/c)	( Part # WVR HYPKIT )
Weaver PVC Glue Kit (HM) for Zodiac, Bombard, West (by Zodiac), Quicksilver, OMC Express and other inflatables	( Part # WVR 3001KIT )
Quick Kit Mount for Weaver Snap Davit RBD100	( Part # WVR QUICKKIT )
Fabric Differences in Inflatable Boats	( Part # INFO FABRIC )
Weaver Snap Davits for Inflatlables, Transom Mount	( Part # WVR RBD150 )
Weaver Snap Davit Stainless Steel Yokes Only for Inflatable Boat Pads	( Part # WVR RSH120 )
Weaver Davit, Rubber Pads Only, Black, pair	( Part # WVR RP101BK )
Weaver Davit, Rubber Pads Only, Gray, pair	( Part # WVR RP101GY )
Weaver Snap Davits for Inflatlables, Transom Mount	( Part # WVR RBD150 )
Weaver Davit, Transom Mount Brackets Only, Pair	( Part # WVR RS150 )
Stand-off poles in various sizes for Weaver Davits	( Part # WVR STANDOFFS )
Weaver Fishing Pole Holder for Inflatables	( Part # WVR FPH401 )
Weaver Davits for Hard Shelled Dinghies	( Part # WVR HARDSHELLDAVIT )

E-Mail sales@shipstore.com with any questions.